VAN XẢ NƯỚC TỰ ĐỘNG NUFORS-CR

(1 đánh giá)

Mã sản phẩm : NUFORS-CR

Xuất xứ : JORC - HÀ LAN

Bảo hành : 06 tháng

VAN XẢ NƯỚC TỰ ĐỘNG JORC - HÀ LAN (KIỂU PHAO) Model: NUFORS-CR Mã số: 3805 Lưu lượng cho máy nén khí 100m3/phút Lỗ xả lên đến 6 mm Áp làm việc max: 3-16 bar Kết nối ren vào: 1/2'' (21mm) Kết nối ren ra: 1/4'' Ứng dụng: Lắp đặt ở những chỗ cần xả lưu lượng lớn như (Máy sấy khí, Bình chứa khí, ...)

Call: 0919-243-248

Chi tiết

VAN XẢ NƯỚC TỰ ĐỘNG JORC - HÀ LAN (KIỂU PHAO)

Model: NUFORS-CR
Mã số: 3805

Lưu lượng cho máy nén khí 100m3/phút

Lỗ xả lên đến 6 mm

Áp làm việc max: 3-16 bar

Kết nối ren vào: 1/2'' (21mm)

Kết nối ren ra: 1/4''

Ứng dụng: Lắp đặt ở những chỗ cần xả lưu lượng lớn như (Máy sấy khí, Bình chứa khí, ...)

NUFORS-CRPneumatically operated level sensed condensate drain

The NUFORS-CR removes condensate from compressed air systems without using electricity.

The discharge process is automatic and is based on a newly developed 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the NUFORS-CR’s orifice can be 6 mm, offering an increased reliability factor.

The NUFORS-CR is ideally suited in applications where power is not available, too expensive or not reliable.

In addition, the NUFORS-CR can be applied in applications that demand a higher IP rating (International Protection rating or Ingresss Protection.
The NUFORS-CR offers an IP 68/NEMA 6 rating.

SPECIFICATIONS

MAXIMUM COMPRESSOR CAPACITY	100 m³/min.
PRESSURE RANGE	3 - 16 bar
VALVE TYPE	Direct acting
VALVE ORIFICE	6 mm
VALVE SEALS	FPM
INLET CONNECTIONS	1/2″ (BSP or NPT), 3 inlet options
INLET HEIGHT	12 cm (top), 9.7 cm and 1.5 cm (side)
OUTLET CONNECTION	1/4" BSP with hose pipe connector
MEDIUM TEMPERATURE	1 - 50 °C
AMBIENT TEMPERATURE	1 - 50 °C
SERVICEABLE VALVE	Yes
TEST FEATURE	Yes
CONDENSATE SIGHT PORT	Yes, optionally available
INTEGRATED MESH STRAINER	Yes
HOUSING MATERIAL	Corrosion resistant aluminium
INGRESS PROTECTION	IP 68/NEMA 6

FEATURES

Integrated strainer to protect the valve.

TEST button feature for routine testing.

Sight port optionally available.

Competitive ‘true green’ solution.
No operating costs.
No electricity required - install and go!
Condensate viewing sight port optionally available.
Operating pressure up to 16 bar.
Reduced stocking costs - 1 model covers 100 m³/min.
Suitable for any type of compressed air system.
No complicated sizing charts required.
Compact and unique design.
Successful draining of condensate due to large orifice (also heavily emulsified condensate).
Incredibly easy and quick to install and to service.
No complicated external control air balance line required.
Integrated strainer.
Top and side inlets available.
TEST feature.
Robust aluminium housing.
Direct acting valve construction for a reliable condensate discharge operation.